This wooden tower with roof includes a platform 1.5m high, with HDPE green slide and climbing features such as climbing wall, ladder and net.
What is included in this price?
We have designed this climbing frame with:
- 1 tower 1.4m (w) x 1.4m (d) – 1.5m platform height (can also be produced with 1.2m platform height)
- 1 ladder at an angle
- 1 reinforced armed rope net,
- 1 vertical rock wall with colourful rocks
- 1 HDPE slide or fireman’s pole
Ideal to challenge children and develop coordination and upper body strength.
Recommended age: 3 -12yrs.
Platform height: 1.50m – can be changed to 1.2m or lower
Tower size: 1.4m x 1.4m
Footprint with slide: 2.8m wide x 4.6m deep – safety area required: 5.8m x 8.1m
The tower (and slide) needs to be concreted into the ground.
The timber used is slow grown pressure treated REDWOOD with a 10-year guarantee against rot and infestation, planed with rounded edges for safety.
The slides are made of HDPE and comply with commercial standards.
The fireman’s pole to replace the slide will be stainless steel.
Our towers comply with regulations for commercial play equipment EN1176.
Price includes installation in England and Wales, remote and other areas please contact us for a quote.
The accessories can be customised to your requirements. We can vary the platform height of the towers to 60cm, 90cm, 1.20m or 1.5m and change accessories and climbing features. Please give us a call to design your own tower.
We can also supply and install safer surfacing, please contact us for a quote.
If you have a specific requirement please contact us before placing an order.
The ACTIVE range of towers includes installation, so we will deliver and install the equipment at the same time, with our own vehicle.
PLEASE NOTE THE SWING SETS DO NOT INCLUDE INSTALLATION.
Delivery will be arranged with the customer at the point of order.
If you have access issues, please contact us before ordering.
For SWING FRAMES and ADVENTURE TRAIL ITEMS, EARLY YEARS ITEMS, CLAMBER STACKS AND ROUND TIMBER ITEMS you will need either a FORKLIFT OR TRACTOR OR HELPING HANDS ONSITE to help unload items
Delivery and installation times vary (normally around 2-4 weeks depending on the specific item), so please contact us to discuss your project for an estimated delivery and installation date.
The ACTIVE range of CLIMBING FRAMES includes installation service. Unless specified on the description of each item (swing sets and wigwam EXCLUDE INSTALLATION)
We will discuss dates with you for delivery and installation.
Our team will deliver on the day of the installation with our own vehicle.
Please make sure there is good access to the area, and that we have contact details of the person on site.
The ground needs to be flat and level, and we need to discuss what surface is down before installation.
For tractors, the ground needs to be flat and level, but due to the nature of our climbing frame towers, we can accommodate ground not being flat and level, however, we need to know in advance.
The installation included is for building onto tarmac or grass. If installed onto artificial grass or a rubber surface, there will be an additional cost depending on the surface and the tower.
The towers and slide will be concreted into the ground (materials supplied as part of the installation) or fixed onto existing tarmac or concrete.
*please note that a suitable cushioning surface is needed for these towers to comply with EN1177 regulations.
Only logged in customers who have purchased this product may leave a review.